Tech Alert – Voile Splitboard Dual Height Climbing Heels

In Tech Alert by Voile Mfg.Leave a Comment

If you have purchased Voile Splitboard Dual Height Climbing Heels, Voile is recommending you remove the grey urethane/rubber tubing from the climbing wires. The rubber tubing eliminates any friction against the binding baseplate and causes the wire to rock back and forth until it folds and the plastic heel pad fails. Currently all Voile Splitboard Dual Height Climbing Heels are …

New Voile Splitboard Touring Riser

In Tech Alert by Voile Mfg.Leave a Comment

Increase your uphill touring rotation and enhance your edging ability while side-hilling with the new Voile Splitboard Touring Riser. This 10mm riser, especially with larger boots, increases the rotational angle of your binding and prevents the boot toe from hitting the deck of your board. It will also give you more leverage and boot/binding angulation to enhance your edging ability …

Voile Splitboard Crampon Updated!

In Tech Alert by Voile Mfg.Leave a Comment

The fit and function of the Voile Splitboard Crampon is now compatible with the Voile Light Rail splitboard specific binding and Voile Splitboard Dual Height Climbing Heels. The Voile Splitboard Crampon functions both fixed to the board and mobile attached to your binding. In the fixed mode, you have the advantage of full penetration into the snow, while the climbing …

Voile Mojo RX spliboard and Voile Light Rail splitboard specific binding win Backcountry Magazine’s Editor’s Choice Award.

In Tech Alert by Voile Mfg.Leave a Comment

Sold as a complete package, the Voile Mojo RX/Light Rail package includes Voile Mojo RX splitboard deck, Voile Light Rail splitboard specific binding, Voile splitboard hardware, and Voile splitboard climbing skins. Voile Mojo RX splitboard and Voile Light Rail splitboard specific binding – Both a Backcountry Magazine 2011 Gear Guide Editors’ Choice! New shape, new profile, a prescription for your …

Voile Charger Backcountry skis win Backcountry Magazine’s 2011 Editor’s Choice

In Tech Alert by Voile Mfg.Leave a Comment

In 2010 Voile introduced the award winning Voile Drifter ski design, providing skiers with a whole new skiing experience. Now you can get that same experience in a slimmer, more nimble package. Introducing Voile Charger skis, a Backcountry Magazines’ 2011 Editors’ Choice. From Backcountry Magazine 2011 Gear Guide: Sharing the same heavily rockered tip, lightweight aspen core construction, and powder …

Voile Split Kit – DIY Saw Your Old Board Kit Improved!

In Tech Alert by Voile Mfg.Leave a Comment

Voile is now shipping our nicely updated and improved do it yourself Voile Split Kit. Improvements include completely new Voile Split Kit Puck with 2-hole secure t-nut mounting, lighter Voile touring brackets, more durable rear tabs on the Voile Slider Track, new binding support riser for easier uphill skinning and side-hilling, and new durable plastic coated climbing wires.

Voile Light Rail Splitboard Binding.

In Tech Alert by Voile Mfg.Leave a Comment

Simplify, reduce weight, and increase performance of your Voile splitboard binding system with the new Voile Light Rail splitboard binding. The Voile Light Rail integrates the Slider Track and Strap Binding into a lightweight, low profile, and stiff splitboard binding. The binding base plate is cut away to eliminate ice build-up and reduce weight. The baseplate aluminum rails are CNC …

Voile Trax splitboard binding.

In Tech Alert by Voile Mfg.Leave a Comment

A lightweight and inexpensive way to upgrade your current Voile splitboard binding system. Bolt the Voile Trax splitboard binding to your existing Voile Slider Track, with included t-nuts and screws. The Trax binding baseplate brings your binding closer to the board and with 4 points of contact on the outer edges of the baseplate it is as stiff as the …

Voile splitboard dual height climbing heels.

In Tech Alert by Voile Mfg.Leave a Comment

Upgrade your splitboard with the new Voile splitboard dual height climbing heels. The back climbing wire is the standard height of 55mm and the front wire is 75mm. Also new, a durable plastic coating is applied to the top of each wire to prevent wear on your splitboard binding base plate. Available January 2010. Go to Blogcountry to Comment