Look what came into the shop today!…. No big deal, it’s just the first Voilé ski ever made! Pressed sometime around 1994, at the Evolution Ski company in Salt Lake City. It was first called the Wasatch Fat, which later became the Tele Surf. It was 185cm tall: 117mm in the tip, 95mm at the waist and 110mm at the …
A new and improved Voile Puck Alignment Guide and updated Voile Splitboard Hardware Setup Instructions are included with all Voile Splitboards and Voile Splitboard Hardware shipping this fall. The new Voile Puck Alignment Guide securely traps the Voile Pucks for fast and accurate setup. The newly updated Voile Splitboard Hardware Setup Instructions have a new Disk Reference and Guide section that …
An all-in one quiver that’s designed for and tested by women. Let’s be clear, this is NOT a dude’s board with a Women’s topsheet. An optimized width and dialed flex pattern, this deck it made to fit women’s boot sizes and their height and weight. A directional twin board with an innovative rocker/camber profile, the Women’s Artisan spares no expense …
Voile is proud to introduce the new Artisan splitboard. A directional twin board with an innovative rocker/camber profile, the Artisan spares no expense or detail in design and construction. The unique rocker/camber profile incorporates rocker into the overall shape with camber tucked in beneath the bindings. The rocker offers amazing float in powder, the flat center section is efficient for …
Continuing a strong commitment to US based manufacturing of splitboards and skis, Voile Manufacturing acquired boutique, high quality manufacturer, Sentury Snowboards of Reno Nevada in September 2011. Started by founder and engineer Ben Harmon in 2000, Sentury has been the recipient of the ISPO brand new award for lightweight composite snowboard design as well as X-Games medal winners and Olympians …
In 1991 Brett “Cowboy” Kobernik met the owner of Voile, Mark “Wally” Wariakois and Cowboy and Wally started the splitboard revolution. Seen here in Powderwhore’s new movie Breaking Trail, Cowboy talks about his career as a Utah Avalanche Forecaster and the early days at Voile prototyping the first Voile splitboard. Not to mention making some sweet turns on the original …
New splitboarding segment in this season’s Powderwhore movie: Breaking Trail, including a commentary on the humble beginnings of splitboarding by Brett “Cowboy” Kobernik. Cowboy is the guy who worked with Voile in the early days to develop the current Voile splitboard hardware system. Look forward to seeing the movie! For more info check out www.powderwhore.com
If you have purchased Voile Splitboard Dual Height Climbing Heels, Voile is recommending you remove the grey urethane/rubber tubing from the climbing wires. The rubber tubing eliminates any friction against the binding baseplate and causes the wire to rock back and forth until it folds and the plastic heel pad fails. Currently all Voile Splitboard Dual Height Climbing Heels are …
Increase your uphill touring rotation and enhance your edging ability while side-hilling with the new Voile Splitboard Touring Riser. This 10mm riser, especially with larger boots, increases the rotational angle of your binding and prevents the boot toe from hitting the deck of your board. It will also give you more leverage and boot/binding angulation to enhance your edging ability …
Copyright © 2024 Voile Manufacturing.
