SKU: 1100 Voile Split Kit - DIY

I have built 3 split boards over the last 20 years using these kits and the kits work really well. \nWhat I like is that the end result is a direct reflection of the time and care I put into the project. A straight cut from tip to tail looks good and fits together nicely. \nRemember to seal the inside edges and let it dry before you get carried away drilling holes, you only get one shot at placing the hardware.\nWhat I don’t like is that there is no adjustability in the board hooks and tip clips. If a hook on each end had an eccentric insert, you would be able to tune the placement and lock-up/rigidity of the board. That’s less critical in pow-pow and more reassuring when you get on something gnarly hard.\nI learn something new each time. I tried a Burton with the three hole pattern; it destroyed the saw blade and the exposed inserts had to be filled with epoxy (not very smart on my part).